 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 208-1 SMT Power Inductors - LPO2506 Series * On-board style - 1.65 mm high * InBoard(R) style - only 1.19 high Designer's Kit C332 contains 3 of all InBoard(R) styles Designer's Kit C333 contains 3 of all On-board styles Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 240 - 260 mg Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth PCB washing Only pure water or alcohol recommended InBoard style part number1 LPO2506I-472L_ LPO2506I-682L_ LPO2506I-822L_ LPO2506I-103L_ LPO2506I-153L_ LPO2506I-223L_ LPO2506I-333L_ LPO2506I-473L_ LPO2506I-683L_ LPO2506I-104L_ LPO2506I-154L_ LPO2506I-224L_ LPO2506I-334L_ LPO2506I-474L_ LPO2506I-684L_ LPO2506I-105L_ On-board style part number1 LPO2506O-472L_ LPO2506O-682L_ LPO2506O-822L_ LPO2506O-103L_ LPO2506O-153L_ LPO2506O-223L_ LPO2506O-333L_ LPO2506O-473L_ LPO2506O-683L_ LPO2506O-104L_ LPO2506O-154L_ LPO2506O-224L_ LPO2506O-334L_ LPO2506O-474L_ LPO2506O-684L_ LPO2506O-105L_ L 20%2 (H) 4.7 6.8 8.2 10 15 22 33 47 68 100 150 220 330 470 680 1000 DCR max (Ohms) 0.145 0.165 0.200 0.240 0.300 0.420 0.550 0.765 1.10 1.60 2.50 3.65 4.65 6.75 9.15 14.20 SRF typ (MHz) 90 75 65 60 45 35 30 22 20 15 12 10 8.0 6.5 5.5 4.5 Isat3 (A) 1.6 1.3 1.0 1.0 0.90 0.70 0.60 0.50 0.40 0.30 0.25 0.22 0.18 0.14 0.12 0.10 Irms4 (A) 1.9 1.7 1.5 1.5 1.3 1.0 0.90 0.70 0.60 0.50 0.40 0.32 0.28 0.24 0.20 0.16 1. When ordering, please specify termination and packaging codes: LPO2506O-105LD Termination: L = RoHS compliant silver-palladium-platinum-glass frit Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. DC current at which the inductance drops 10% (typ) from its value without current. 4. Current that causes a 40C temperature rise from 25C ambient. 5. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Specifications subject to change without notice. Please check our website for latest information. Document 208-1 Revised 10/14/08 (c) Coilcraft, Inc. 2009 Document 208-2 SMT Power Inductors - LPO2506 Series Typical L vs Frequency 10000 1000 H Typical L vs Current 10000 1000 1000 H Current Derating 120 110 100 Percent of rated Irms 1000 90 80 70 60 50 40 30 20 10 25C Inductance (H) 100 H Inductance (H) 100 100 100 H 10 H 10 10 H 10 1 0.01 0.1 1 10 1 0.01 0.1 1 10 0 -40 -20 0 20 40 60 80 100 120 140 Frequency (MHz) Current (A) Ambient temperature (C) On-board Style 103 0.360 max 9,14 Dash number Recommended Land Pattern 0.048 1,21 0.285 7,24 0.310 max 7,87 0.190 4,83 0.205 5,21 0.254 max 6,45 0.065 max 1,65 0.230 5,84 0.285 max 7,24 0.030 0,76 0.380 max 9,65 InBoard Style 0.360 max 9,14 0.061max 1,55 0.048 1,21 Recommended Land Pattern 0.285 7,24 0.310 max 7,87 0.190 4,83 0.205 5,21 0.254 max 6,45 0.047 max 1,19 0.230 5,84 0.284 7,21 hole through board Mounting plane: through board 0.285 max 7,24 0.030 0,76 0.380 max 9,65 Specifications subject to change without notice. Please check our website for latest information. Document 208-2 Revised 10/14/08 (c) Coilcraft, Inc. 2009 |
Price & Availability of LPO2506I-103L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |